欢迎光临山东墨源数控设备有限公司官网为您提供:保丽龙雕刻机,五轴保丽龙刻机,四轴保丽龙雕刻机

INFORMATION
业内资讯
联系我们

18560023440

王经理:18560023440
地址:山东省德州市齐河县经济开发区齐众大道7号-2车间

业内资讯 当前位置:首页 - 新闻中心 > 业内资讯 >

石材雕刻机在使用过程为什么要加水?

来源:http://www.kalehandbags.com 时间:2022-04-06 

标配的石材雕刻机,墓碑雕刻机都是双冷却的,一方面由于石材材质较硬,所以在工作的时候要水冷刀头,另一方面是水冷却主轴,防止主轴温度过高,对主轴起到一定的保护作用。不过如果客户在不注意或者不按培训步骤工作的话,就会出现不通水干烧的现象,对机器本身造成严重损害。
The standard stone engraving machine and tombstone engraving machine are double cooled. On the one hand, because the stone material is hard, the water-cooled cutter head should be used when working. On the other hand, the water cools the spindle to prevent the spindle temperature from being too high and play a certain role in protecting the spindle. However, if the customer doesn't pay attention or doesn't follow the training steps, there will be no water and dry burning, which will cause serious damage to the machine itself.
石材雕刻机主轴干烧容易导致的就是主轴发热过度,温度过高导致烧掉。一般主轴烧掉后,就得需要把坏的返厂维修。然后修好再从工厂发回来,这样一来一回的周期大约1周左右,会严重耽误正常加工工期,如果客户那边着急要订单的话,会造成很大的损失。所以说客户在加工的时候,一定要按照工厂技术员的培训操作,保证机器的正常使用,延长机器的适用周期。
The dry burning of the spindle of stone carving machine is easy to lead to excessive heating of the spindle and burning out due to too high temperature. The spindle needs to be returned to the factory for repair. Then repair it and send it back from the factory. This cycle is about 1 week, which will seriously delay the normal processing period. If the customer is anxious to order, it will cause great losses. Therefore, when processing, customers must operate according to the training of factory technicians to ensure the normal use of the machine and prolong the application cycle of the machine.
二,如果石材雕刻机的主轴没有通水冷却,就会一直处于持续高温发热状态。容易导致主轴出现抖动或者错位,雕刻忽快忽慢,不稳定的现象。一方面会使精度会受到影响,另一方面主轴错位会使得雕刻样品错位,雕刻出的样品自然漏洞百出,非常不精细。
2、 If the main shaft of the stone carving machine is not cooled by water, it will always be in a state of continuous high temperature heating. It is easy to cause shaking or dislocation of the main shaft, fast and slow engraving and instability. On the one hand, the accuracy will be affected. On the other hand, the dislocation of the main shaft will cause the dislocation of the carved samples. The carved samples are naturally full of holes and are very not fine.
以上就是为大家介绍的有关3050保丽龙雕刻机的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kalehandbags.com/
The above is the detailed introduction of 3050 styrofoam engraving machine. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.kalehandbags.com/
免费a级毛片高清视频不卡_免费观看av福利片_嗯~教官不要~受不了了_国产av激情无码久久_av 人妻 在线 一区 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>